A pond is always generated if the Control Type is Volume Control.
Pond generation is optional for:
•Freeboard; and
•Elevation control.
To set pond generation parameters:
•Click the Pond Generation Tab.
•Enter parameters on the Pond Generation Sheet:
oGenerate Ponds: Generate ponds during a deposition model run:
▪Generate Sequence Ponds: Generate a pond following each Deposition Sequence.
•Generate Boundary: Generate a pond boundary.
•Generate Volume Elevation Curve.
•Elevation Increment: The elevation increment to use for the Volume Elevation Curve.
▪Generate Raise Ponds: Generate a pond following each Deposition Raise.
•Generate Boundary: Generate a pond boundary.
•Generate Volume Elevation Curve.
•Elevation Increment: The elevation increment to use for the Volume Elevation Curve.
They current recommendation is to not generate sequence ponds as: •They significantly increase model run times. •The provide limited output. |